Everbuild One Strike Filler 1L

Description

Product Overview

Everbuild One Strike Filler supplied in a 1 litre tub is a lightweight, ready-to-use filler formulated for high-capacity repair work on plaster, wood, stone, and masonry.
Made with advanced polymeric microfillers, it provides a smooth, professional finish in a single application without shrinkage, sagging, or cracking. The large-format tub is designed for efficient use on wide surface areas and multiple repair jobs, offering excellent value and consistent coverage. Once applied, it dries to a brilliant white finish ready for immediate decoration.This advanced filler is engineered for both interior and exterior use where fast, durable repair performance is required. Its rapid-drying composition enables sanding-free finishing and overpainting within 30 minutes for water-based coatings.
The 1L pack size is ideal for decorators, contractors, and maintenance teams needing a high-volume filler for continuous use across large projects or recurring repair work.

Features & Benefits

• Lightweight polymer formula: Provides a smooth, non-sagging paste that bonds firmly without shrinkage or cracking.
• One-coat application: Fills deep gaps and holes up to 75mm in a single layer, eliminating the need for multiple coats.
• Rapid drying: Ready to paint or wallpaper after approximately 30 minutes under standard conditions.
• Paint-ready surface: Dries brilliant white with a smooth finish suitable for immediate overpainting or staining.
• Large-format tub: Designed for extended use on wide surfaces and multiple areas without frequent replenishment.
• Multi-surface compatibility: Adheres effectively to plaster, brick, stone, render, and wood for versatile repair use.
• Weather-resistant performance: Suitable for interior and exterior use when overpainted externally.
• Non-shrink and non-sag finish: Maintains integrity on ceilings and vertical surfaces without deformation.
• Size – 1 litre tub: Provides high-volume capacity for broad coverage and professional, continuous application.

Applications

• Interior wall repair: Ideal for filling large cracks, gaps, and surface holes in plaster or painted substrates.
• Ceiling restoration: Suitable for overhead work where non-sag performance is essential.
• Woodwork finishing: Repairs extensive defects in doors, trims, and skirting boards before decoration.
• Masonry patching: Smooths larger voids and surface damage in stone, brick, or render.
• Pre-decorating preparation: Levels large areas for uniform paint or wallpaper application.

Installation Guidance

• Surface preparation: Ensure all areas are clean, dry, and free from dust, grease, or loose material.
• Product access: Open the tub and remove the required amount using a filling knife, trowel, or broad spatula.
• Application method: Apply directly into the repair area, pressing firmly for full adhesion.
• Finishing technique: Level the surface using a filling knife or suitable smoothing tool.
• Drying and overcoating: Allow to dry for at least 30 minutes before painting with water-based coatings, or 12 hours for solvent-based paints.
• Aftercare: Clean nozzle immediately after use to prevent hardening within the cartridge.

Compliance & Performance

• Material composition: High-strength lightweight polymeric fillers with a density of 0.48–0.53 g/cm³.
• Finish characteristics: Brilliant white, smooth, and paintable surface.
• Performance specification: Maximum fill depth of 75mm in one coat; low movement accommodation.
• Application conditions: Suitable for use between +5°C and +30°C; must not be applied when rain is imminent externally.
• Service suitability: Compatible with most water- and solvent-based paints; internal and external use when overpainted.
• Storage conditions: Store at moderate temperatures; shelf life 24 months from manufacture.
• Important note: Not suitable for use on plastics or metals. Always overpaint when used externally to ensure weather protection.